Helpful Tips When Laser Engraving Wood

There’s no doubt about it, wood is awesome. The texture, grain, and even the smell of engraved wood is something spectacular. While laser engraving a piece of wood may seem like a pretty simple and straightforward task, the reality is that it can be difficult to get a clean, dark, and sharp engraving. As a result, it’s a good idea for those who are new to wood engraving to use the tips here to make the process a bit easier.

Use Low-Tack Masking Tape to Help Minimize Burn Stains

When using a laser engraver, the laser beam is burning the wood and vaporizing the material. When wood is vaporized by burning, smoke is formed. The smoke moves across the surface of the wood and can leave a brown or yellow stain.

To reduce this staining, cover the wood’s surface with a low-tack masking tape prior to engraving. The wider the tape the better, as it will allow a person to cover the entire surface of the wood quickly. After engraving, simply remove the tape and see that the stain comes off with the tape.

Burn at 1200 DPI for a Dark Engraving

If a person is trying to achieve a sharp engraving, along with a dark contrast for the wood, they should think about increasing the engraving resolution. The more DPI (dots per inch) that are used, the more times that the laser is going to fire, and the darker the wood will be burned. When a person opts to increase their DPI, it is going to make it take twice as long to handle the job so, if fast production is necessary, this may not be the best option for the job.

When it comes to laser engraving wood, there are more than a few things to consider. Be sure to use the tips and information here to achieve the best possible results with the engraving process. More information about a laser and how to use it for engraving wood can be found by checking out the boss laser cutter review, which can be an invaluable piece of information.